Specialty Sockets & Bits

Slotted Double-D Socket 5 x 8mm

Slotted Double-D Socket 6 x 8mm

5MM Hex Bit - 1/2" Drive

New 8mm & 10mm sizes Will Service -09 & up Honda Odyssey & Pilot seat tracks Both sizes are required for both the driver & pass...

10 Point x 19mm socket services selected Honda & Acura rear trailing arms 1/2" Square drive Applications Applications include but are not lim...

Services clutch pressure plate bolts / assemblies Use with a 3/8" square drive Applications: Mitsubishi Eclipse, 3000 & Dodge Stealth Size Ref...

10 piece socket set offers the 5 most popular styles of 10mm sockets in 1/4" and 3/8" drives Includes stubby, standard, deep, flex, and magnetic i...

Removes & installs the axle hub bearing retaining nut Use with 1/2" Square Drive Services 292AA (11.5”) Rear Hubs on Dodge (2015+) & GM (2...

Removes later style central valve on BMW Vanos Hubs and Ford VCTs Services BMW/MINI B36 (1.5L), B38 (1.2L & 1.5L), B48 (2.0L), B58 (3.0L) &...

Holds intake camshaft sprocket during timing service Services Porsche 911 Turbo (996) OAL: 25cm/250mm (9.85") Compare to Porsche Factory Tool 9653...

Used for removing & installing the oil drain plug on 4.2L FSI, 4v V8 engine Also used for removing & installing the intake manifold on 2.0...

Special oval shaped bit end services Suspension Strut Housing Nuts found on mostly newer VW & Audi models After removing pinchb...

Remove and install screw-in type ball joints 3/4" drive Size: 1-59/64" Applications: Mid-size, rear-wheel drive cars

Remove and install screw-in type ball joints 3/4" drive Size: 2-9/64" Applications: Light trucks and vans

Applications: Ford F150 & Bronco with Dana 44 outer locking nut (1981-1997) 1/2" square drive Dimensions: OAL: ...

1/2" square drive Compare to Toyota Factory Tool #09318-12010-SOCK Applications: 4WD Tacomas (1995+) 4WD T100 and 4Runners, all w/lockout hubs ...

Applications: Dodge 1994-2002 w/ 1/2 Ton 4x4 Pick-ups Services: Dana 44 and/or a 60 front axle w/ vacuum disconnect 1/2" drive square drive Size: ...

Services 46mm x 12 point retaining nuts found on many BMW models Similar to BMW Tool #31-2-080 Special Thin Wall Socket OAL: 68mm ...

1/2" square drive Applications: Ford Ranger, Bronco II & Explorer w/ manual hubs (1993+) Ford F-series 1/2, 3/4 &...

Applications: Ford F-series Heavy-Duty 3/4 & 1 ton 4WD trucks (1978-1984) GM 3/4 & 1 ton 4WD trucks (1973-1981) ...

Applications: Ford Ranger & Bronco II w/ manual hubs (1984-1992) Ford F-series 1/2 ton truck and full-size Bronco w/ D...

Applications: Ford F-series Heavy-Duty 3/4 & 1 ton Dana 50 IFS or Dana 60 front axle (1985-1995) Ford F-series 1/2 to...

Applications: Ford F250, F350 & F450 Super Duty trucks w/ 10-1/2" rear axle (2003+) 1/2" square drive Compare to Ford Factory Tool #205-282 &...

Applications: 9-pin design fits retaining nut on 2WD and 4WD drive Avalanche, Cheyenne, Escalade, Sierra, and Silverado trucks with...

Applications: Isuzu Trooper, Rodeo, Amigo & pick-ups (1988+) Honda Passport & Jeep J20 pick-ups w/ Dana 60 axle (1989+) Nissan Xterra (...

Applications: Ford F250 & F350 w/ Dana 80 rear axle (1985+ ) Ford E350 w/ Dana 80 rear axle (1987+) Ford F su...

Applications: Chevy & GMC 5,200 & 7,200 lb axles (1946+) 3/4" square drive Dimensions: OAL: 2-7/8" Depth:...

Applications: Ford F-series, full size Broncos w/ Automatic Locking Hubs (1995-2001) 1/2" drive tools Size: 2-1/2" Ro...

Applications: 3/4 & 1-Ton Ford F250, F350 & F550, Trucks w/ Automatic Locking Hubs 1/2" drive tools Size: 2-3/...

Applications: Ford Rangers & Bronco II's w/ Automatic Locking Hubs (1984-1992) 1/2" drive tools Size: 2-3/8" 6-point

Applications: Dodge Trucks w/ Dana 60 Manual Hubs (1990-1993) 1/2" drive tools Size: 2-9/16" Rounded 6-Point

Applications: Ford Rangers, Bronco II & Explorers w/ Automatic Locking Hubs (1990+) 1/2" drive tools Size: 2-3/...

Applications: Toyota FJ, LN & RN models w/ Front Adjusting Nuts 1/2" drive tools Size: 55mm or 2-3/32 6-point

Applications: Rear Axle & Front Axle applications on Light-Duty Trucks 1/2" drive tools Size: 2-1/2" 6-Point

"Flip" Socket offers 2 hex sizes in one socket - 22mm & 24mm Use with 1/2" drive extended shank impact tools with an extension Ser...

2 Pc set includes filp socket and 3" extension "Flip" Socket offers 2 hex sizes in one socket - 22mm & 24mm Use with 1/2" drive extended shank ...